kemet electronics corporation, p.o. box 5928, greenville, s.c. 29606, (864) 963-6300 38 kemet c 0805 c 103 k 5 r a c* ceramic size code specification c - standard capacitance code expressed in picofarads (pf) first two digits represent significant figures. third digit specifies number of zeros. (use 9 for 1.0 thru 9.9pf. use 8 for 0.5 through 0.99pf) (example: 2.2pf = 229 or 0.50 pf = 508) capacitance tolerance b 0.10pf j 5% c 0.25pf k 10% d 0.5pf m 20% f 1% p ?(gmv) g 2% z ?+80%, -20% l # w # t (eia) # b s mounting length width thickness max. bandwidth min. separation technique 1.0 (.04) .05(.002) 0.5 (.02) .05 (.002) 0.55 (.022) 0.20 (0.008)-0.40 (0.016) 0.3 (.012) solder reflow 1.6 (.063) 0.15 (.006) 0.8 (.032) 0.15 (.006) 0.9 (.035) 0.35 (.014) 0.15 (.006) 0.7 (.028) 2.0 (.079) 0.2 (.008) 1.25 (.049) 0.2 (.008) 1.3 (.051) 0.5 (.02) .25 (.010) 0.75 (.030) solder wave 3.2 (.126) 0.2 (.008) 1.6 (.063) 0.2 (.008) 1.5 (.059) 0.5 (.02) .25 (.010) n/a solder reflow 3.2 (.126) 0.2 (.008) 2.5 (.098) 0.2 (.008) 1.7 (.067) 0.5 (.02) .25 (.010) n/a 4.5 (.177) 0.3 (.012) 3.2 (.126) 0.3 (.012) 1.7 (.067) 0.6 (.024) .35 (.014) n/a 4.5 (.177) 0.3 (.012) 6.4 (.252) 0.4 (.016) 1.7 (.067) 0.6 (.024) .35 (.014) n/a 5.6 (.220) 0.4 (.016) 5.0 (.197) 0.4 (.016) 1.8 (.071) 0.6 (.024) .35 (.014) n/a 5.6 (.220) 0.4 (.016) 6.3 (.248) 0.4 (.016) 2.0 (.079) 0.6 (.024) .35 (.014) n/a dimensions?illimeters and (inches) cap acit or ordering informa tion c0g (np0), x7r, z5u and y5v dielectrics 10, 16, 25, 50, 100 and 200 volts standard end metalization: tin-plate over nickel barrier available capacitance tolerances: 0.10 pf; 0.25 pf; 0.5 pf; 1%; 2%; 5%; 10%; 20%; and +80%-20% tape and reel packaging per eia481-1. (see page 51 for specific tape and reel information.) bulk cassette packaging (0402, 0603, 0805 only) per iec60286-6 and eiaj 7201. fea tures cap acit or outline dra wings end metallization c-standard (tin-plated nickel barrier) failure rate level a- not applicable temperature characteristic designated by capacitance change over temperature range g ?c0g (np0) ( 30 ppm/ c) r ?x7r ( 15%) u ?z5u (+22%, -56%) v ?y5v (+22%, -82%) voltage 1 - 100v 3 - 25v 2 - 200v 4 - 16v 5 - 50v 8 - 10v w l t b s tin pla te nickel pla te conductive met alliza tion electrodes * part number example: c0805c103k5rac (14 digits - no spaces) * note: indicates eia preferred case sizes # note: different tolerances apply for 0402, 0603, and 0805 packaged in bulk cassette. or solder reflow ceramic chip/st and ard metric size code (ref only) 1005 1608 2012 3216 3225 4532 4564 5650 5664 eia size code 0402* 0603* 0805* 1206* 1210* 1812 1825* 2220 2225 (standard chips - for military see page 45)
kemet electronics corporation, p.o. box 5928, greenville, s.c. 29606, (864) 963-6300 41 kemet ceramic chip/standard ceramic surface mount note: for non - standard capacitance values or voltages, contact your local kemet sales representative. 50 volt ceramic chips can be used for 63 volt applications. * eia preferred chip sizes c0805* c1206* c1210* c1812* c1825* c2225 100v50v 100v 50v 100v 50v 334 394 474 100v100v50v100v50v100v 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 50v m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z m,z cap tol 6800.0 8200.0 10,000.0 12,000.0 15,000.0 18,000.0 22,000.0 27,000.0 33,000.0 39,000.0 47,000.0 56,000.0 68,000.0 82,000.0 100,000.0 120,000.0 150,000.0 180,000.0 220,000.0 270,000.0 330,000.0 390,000.0 470,000.0 560,000.0 680,000.0 820,000.0 1,000,000.0 1,200,000.0 1,500,000.0 1,800,000.0 2,200,000.0 cap. pf 682 822 103 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 473 563 683 823 823 104 124 154 184 224 274 334 394 474 564 684 824 105 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 184 224 274 334 394 334 394 474 564 684 824 105 125 155 185 225 z5u capacitance range (kemet's z5u also meets y5v characteristics)
|
